Description
Rx V 5000
contains renewable raw material / wood fibers
Extruded, thermoplastic and high quality toe puff material meeting highest demands for premium shoes. The material is covered with spun lace polyester and skived edges are sticky because the adhesive is in the compound. It can be used e.g. for ladies, men and in lower grades for children shoes.
-
Solvent free processing, no additional adhesive required
- Recycling is possible, even if the product is supported by a fabric
-
Full re-use of recycled material in the same product
-
Non-directional cutting for carrier-free material and with the material being supplied edge welded (nostaples), pairs per sheet is optimized.
- High quality toe puff
- Filler: wood fibers
- Skived edges are sticky because the adhesive is in the compound
- eco-friendly material
Technical Information
Adhesive: one side bonding // the polyester adhesive is in the compound
Type | Thickness |
soft | |
Rx V 5831
|
0.50 – 0.60 mm
|
firm | |
Rx V 5531
|
0.70 – 0.85 mm
|
Rx V 5541 |
0.85 – 1.00 mm
|
Rx V 5551 |
1.10 – 1.15 mm
|
Rx V 5561 |
1.15 – 1.30 mm
|
semi-firm | |
Rx V 5931
|
0.50 – 0.60 mm
|
Rx V 5941 |
0.60 – 0.70 mm
|
Rx V 5951 |
0.70 – 0.80 mm
|
Rx V 5961 |
0.80 – 0.90 mm
|
Method for use
|
Required interface temperature for bonding: approx. 95 – 100°C
|
Activating temperature: approx. 130 – 140°C
|
|
Time: approx. 5 – 9 seconds
|
|
Clamp heater reactivation before lasting | Temperature: approx. 130 – 150°C |
Time: approx. 6 – 11 seconds
|
Hint: All data may vary according to substance of material and type of upper
Delivery: Sheets, 1.00 x 1.50 m
Cutting: in diagonal direction
Skiving: We recommend a rippled steel bottom roller and a suitable skiving foot
Reviews
There are no reviews yet.