Rx 5000
  • High quality counter
  • Filler: wood fibers
  • eco-friendly material
  • Thickness: 0.55 – 1.60 mm
  • Adhesive: both side bonding // the polyester adhesive is in the compound
Categories: ,

Description

Rx 5000
contains renewable raw material / wood fibers

Extruded, thermoplastic and high quality counter material available in variety of grades to meet the highest demands of premium shoes. The skived edges are sticky because the adhesive is in the compound. It can be used e.g. for ladies, men and in lower grades for children shoes.

  • Solvent free processing, no additional adhesive required
  • Recycling is possible, even if the product is supported by a fabric
  • Full re-use of recycled material in the same product
  • Non-directional cutting for carrier-free material and with the material being supplied edge welded (no staples), pairs per sheet is optimized.
  • High quality counter
  • Filler: wood fibers
  • eco-friendly material

Technical Information

Adhesive: both side bonding // the polyester adhesive is in the compound

Rx 5000 (semi-firm)

carrier free products one fabric carrier two fabric carrier
Rx 5050 1.00-1.15mm Rx 5022
0.65-0.75mm
Rx 5025 0.65-0.80mm
Rx 5060
1.15-1.30mm
Rx 5032 0.75-0.90mm Rx 5035 0.85-1.00mm
Rx 5070
1.30-1.45mm
Rx 5042 0.90-1.05mm Rx 5045 1.00-1.15mm
Rx 5052 1.05-1.20mm Rx 5055 1.15-1.30mm
Rx 5062 1.20-1.35mm Rx 5065 1.25-1.40mm

Rx 5100 (firm)
one fabric carrier two fabric carrier
Rx 5112
0.40-0.60mm
Rx 5122 0.60-0.75mm
Rx 5132 0.75-0.90mm
Rx 5142 0.85-1.00mm Rx 5145 0.95-1.10mm
Rx 5152 1.00-1.15mm Rx 5175 1.40-1.55mm
Rx 5172
1.30-1.45mm
Rx 5175 P
1.45-1.60mm

Rx 5400 (soft/flexible)
one fabric carrier two fabric carrier
Rx 5412
0.55-0.65mm
Rx 5435
0.80-0.95mm
Rx 5422 0.60-0.75mm
Rx 5432 0.75-0.90mm
Rx 5442 0.90-1.05mm
Method for use Required interface temperature for bonding: approx. 90 – 100°C
Activating temperature: approx. 120 – 140°C
Time: approx. 15 – 40 seconds
Hint: All data may vary according to substance of material and type of upper
Delivery: Sheets, 1.00 x 1.50 m
Cutting: in length direction
Skiving: We recommend a rippled steel bottom roller and a suitable skiving foot

Reviews

There are no reviews yet.

Be the first to review “Rx 5000”

Your email address will not be published. Required fields are marked *